MITSUBISHI CHEMICAL

Diamana™ GT

Focusing on “optimized stiffness distribution,” this latest design enhances the rigidity at the butt end while retaining the strong tip section that minimizes head wobble. As a result, players can feel more flexibility in the mid-section of the shaft. The combination of high stability and quick shaft release delivers a consistent, automatic release and enables precise, intended trajectories. Designed for high stability with a quick rebound, enabling an automatic follow-through.

Diamana™ GT

SPEC

Shaft Name Flex Length(mm) Weight(g) Tip O/D (mm) Tip Length(mm) Butt O/D(mm) Torque(deg) Kick Pt.
Diamana™ GT 40 R2 1168 46 8.6 75 15.50 5.6 MID-HIGH
Diamana™ GT 40 R 1168 47 8.6 75 15.50 5.6 MID-HIGH
Diamana™ GT 40 SR 1168 48.5 8.6 75 15.50 5.5 MID-HIGH
Diamana™ GT 40 S 1168 49.5 8.6 75 15.50 5.4 MID-HIGH
Diamana™ GT 40 X 1168 49.5 8.6 75 15.50 5.4 MID-HIGH
Diamana™ GT 50 R 1168 56.5 8.6 75 15.50 4.7 MID-HIGH
Diamana™ GT 50 SR 1168 56.5 8.6 75 15.50 4.7 MID-HIGH
Diamana™ GT 50 S 1168 56.5 8.6 75 15.50 4.6 MID-HIGH
Diamana™ GT 50 X 1168 59.5 8.6 75 15.50 4.6 MID-HIGH
Diamana™ GT 50 TX 1168 61 8.6 75 15.50 4.5 MID-HIGH
Diamana™ GT 60 SR 1168 60.5 8.6 75 15.50 3.9 MID-HIGH
Diamana™ GT 60 S 1168 62.5 8.6 75 15.50 3.8 MID-HIGH
Diamana™ GT 60 X 1168 65 8.6 75 15.50 3.8 MID-HIGH
Diamana™ GT 60 TX 1168 65.5 8.6 75 15.50 3.8 MID-HIGH
Diamana™ GT 70 S 1168 72.5 8.6 75 15.55 2.9 MID-HIGH
Diamana™ GT 70 X 1168 75.5 8.6 75 15.55 2.8 MID-HIGH
Diamana™ GT 70 TX 1168 77.5 8.6 75 15.55 2.8 MID-HIGH
Diamana™ GT 80 S 1168 82 8.6 75 15.55 3.0 MID-HIGH
Diamana™ GT 80 X 1168 85.5 8.6 75 15.55 2.9 MID-HIGH
Diamana™ GT 80 TX 1168 85.5 8.6 75 15.55 2.9 MID-HIGH
[MADE IN CHINA]

TECHNOLOGY

  • X‑link Tech

    X‑link Tech

    A new matrix resin technology that optimizes composition to form a rigid cross‑link structure. Enhances molding properties by up to 14% in strength, 15% in modulus, and 8% in strain-to-failure compared to conventional resins—unlocking MR70’s full potential.

  • Consistent Feel Design

    Consistent Feel Design

    Minimizes weight differences and butt-diameter variation between flexes in same weight class, and butt diameter differences across 40–80 g specs. Reduces sensory mismatch between weights/flexes, enabling smoother set-up from drivers to fairway woods.

MATERIAL

  • MR70™

    MR70™

    A breakthrough carbon fiber balancing stiffness and strength by reengineering precursor and resin processes. Offers ~20% higher strength and ~10% higher modulus vs. previous grades.

  • BoronFiber

    BoronFiber

    High‑reinforcement boron fiber used where rigidity and reinforcement are prioritized—e.g. aerospace or high-performance fishing rods.